Mitsubishi ah129 User Manual
21
01:JOHN
3214567
↓
2sec
Replace
∗
:Y/#:N
If “
∗
” key is pressed, the new telephone number will replace
the existing number and the display will be changed as
indicated below.
If “#” key is pressed, the display will be changed to the
“Enter Addr.” message, allowing a different memory location
to be entered.
And if the “CLR” or “END” keys are pressed, the entered
telephone number is canceled and the phone will exit from
the store mode.
Any other key entries (except for “PWR” key) are ignored
and an error tone is heard.
indicated below.
If “#” key is pressed, the display will be changed to the
“Enter Addr.” message, allowing a different memory location
to be entered.
And if the “CLR” or “END” keys are pressed, the entered
telephone number is canceled and the phone will exit from
the store mode.
Any other key entries (except for “PWR” key) are ignored
and an error tone is heard.
Stored
Addr.01
Note:
•
When this storing procedure is used, the old
phone number’s corresponding alphabet name
is cleared.
phone number’s corresponding alphabet name
is cleared.
RECALLING OFTEN-USED NUMBERS
Press “RCL” (RECALL) key. The following message ap-
pears:
pears:
Enter
Addr.
Enter the required memory location (01 to 39).