Mitsubishi ah129 User Manual
49
depress the “STO” key followed by “P”. This memory
can hold up to 32 digits.
can hold up to 32 digits.
Note:
(1) If the one touch dial memory has another
telephone number:
telephone number:
The current telephone number is displayed for
two (2) seconds. The “overwrite warning tone”
will be heard, and the confirmation message will
be displayed.
two (2) seconds. The “overwrite warning tone”
will be heard, and the confirmation message will
be displayed.
P:
3214567
↓
2sec
Replace
∗
:Y/#:N
If “
∗
” key is pressed, the new telephone
number will replace the existing number.
If “#” key is pressed, the display will be
changed to the above “Enter Addr.” message,
allowing a different memory location to be
entered.
changed to the above “Enter Addr.” message,
allowing a different memory location to be
entered.
And if the “CLR” key is pressed, the entered
telephone number is canceled and the phone
will exit from the store mode.
telephone number is canceled and the phone
will exit from the store mode.
Any other key entries (except for the “PWR”
key) are ignored and an error tone will be heard.
key) are ignored and an error tone will be heard.
(2)
RECALL
Direct Operation: RCL + P (Standby only)
P:33456
7891234
Function: If you want to recall the “One Touch Dial Number”,
enter the “RCL” key followed by “P”. The current one touch
dial number will be displayed.
enter the “RCL” key followed by “P”. The current one touch
dial number will be displayed.