Hitachi VM-H725LA User Manual

 

Hitachi REVERSE 

Sony PROGRAM 

Panasonic FORWARD 

Toshiba IN 

Mitsubishi COPY 

START 

Sanyo OUT 

Sharp 

 

NEC 

 

JVC 

 

Akai A/V 

DUB 

Gold Star 

 

PHILIPS 

 

RCA DISPLAY 

Zenith COUNTER 

RESET 

Magnavox TITLE 

ON/OFF 

 

Note: The remote control code is held in memory until it is changed or the batteries are replaced. 
Note: Point the remote control straight at the VCR's infrared receiver for operation. 
Note: Use the remote control indoors. When the infrared receivers of the VCR and camcorder are exposed to 
direct sunlight or strong artificial light, the remote control may not operate correctly. 
Note: The remote control cannot be operated if there is an obstacle between the remote control and infrared 
receiver. Especially, be careful of this during dubbing. 
Note: When the edit remote control is connected to the camcorder, the buttons marked * in the figure above 
perform the same operations as those of the other remote control provided. 

You can select up to four different scenes or segments to be copied at one time. 

Note: If sunlight or strong artificial light strikes the camcorder's infrared receiver, the editing operation may 
not be possible. 

Programmable Edit Hookup 

1. Connect the edit remote control to the camcorder, and then connect the AV stereo output cable as illustrated 
above. 
2. Insert a recorded tape into the camcorder. 
3. Set the CAM/OFF/VIDEO switch of the camcorder to VIDEO. Turn the recording VCR on and select line input. 
4. Press the PROGRAM button of the remote control. The program display appears in the viewfinder.