Konica Minolta pi3505e ai printer controller 1.1.0 User Manual
Network Settings
3
Pi3505e Printer Driver
3-17
3.7
NetWare Printing
This section explains how to print with NetWare.
Configuring Print Settings on a PC Used for Printing
The controller supports the system environment described below.
Configuring NetWare 3.2 Print Server Mode settings
1
Log in with Supervisor rights to the NetWare server that is registered
at the Pserver.
at the Pserver.
2
Start up Pconsole.
3
From the
Available Options
, select
Print Queue Information
, and
then click
Enter
.
4
Click
Insert
, input the
Print Queue Name
, and then click
Enter
.
5
Click
Esc
to return to the
Available Options
.
6
Select
Print Server Information
, and then click
Enter
.
7
Click
Insert
, input the print server name into
New Queue Name
, and
then click
Enter
.
8
Select the print server you just created, and then click
Enter
to display
the
Print Server Information
menu.
9
On the
Print Server Information
menu, select
Print Server
Configuration
. This will display the
Print Server Configuration
menu.
10
Select
Printer Configuration
, and then click
Enter
. This will display
the
Configured Printers
list.
11
Select
Not Installed
at the top of the list, and then click
Enter
. This will
display the Printer 0 Configuration screen.
NetWare Version
Protocol
Emulation
Service Mode
NetWare 3.2
IPX
Bindery
Pserver/Rprinter
NetWare 4.x
IPX
NDS
Pserver/Nprinter
NetWare 5.x
NetWare 6
NetWare 6
IPX
NDS
Pserver
TCP/IP
NDPS(lpr)