Konica Minolta pi3505e ai printer controller 1.1.0 User Manual
3
Network Settings
3-20
Pi3505e Printer Driver
Configuring NetWare 3.2 Remote Printer Mode settings
1
Log in with Supervisor rights to the NetWare server that is registered
at the Pserver.
at the Pserver.
2
Start up Pconsole.
3
From the
Available Options
, select
Print Queue Information
, and
then click
Enter
.
4
Click
Insert
, input the
Print Queue Name
, and then click
Enter
.
5
Click
Esc
to return to the
Available Options
.
6
Select
Print Server Information
, and then click
Enter
.
7
Click
Insert
, input the print server name into
New Queue Name
, and
then click
Enter
.
8
Select the print server you just created, and then click
Enter
to display
the
Print Server Information
menu.
9
On the
Print Server Information
menu, select
Print Server
Configuration
. This will display the
Print Server Configuration
menu.
10
Select
Printer Configuration
, and then click
Enter
. This will display
the
Configured Printers
list.
11
Select
Not Installed
at the top of the list, and then click
Enter
. This will
display the Printer 0 Configuration screen.
12
In the
Name
field, change the printer name to Pi3505e, and then click
Enter
.
13
Select
Type
, and then click
Enter
. Select Remote Parallel, LPT1 and
then click
Enter
to register the print server configuration.
14
Click
Esc
to save your settings.
15
Click
Esc
again to return to the
Print Server Configuration
menu.
16
Select
Queues Serviced by Printer
and then click
Enter
.
17
On the
Defined Printers
list, select the Pi3505e printer you configured
in step 12 above, and then click
Enter
.