Konica Minolta pi3505e ai printer controller 1.1.0 User Manual
Network Settings
3
Pi3505e Printer Driver
3-27
Configuring NetWare 5.x NDS Print Server Mode settings
Note
In order to use the print server mode, you need load IPX protocol on
to the NetWare server.
In order to use the print server mode, you need load IPX protocol on
to the NetWare server.
1
Log in with Admin privileges.
2
Start up NWadmin.
3
Select the organization or department container that will perform print
services, and then select
services, and then select
Print Service Quick Setup (Non-NDPS)
on
the
Tools
menu.
4
Enter data for
Print Server Name
,
Printer Name
,
Print Queue
Name
, and
Volume Name
, specify
Other/Undefined
for the printer
Type Name, and then save the settings.
For information about configuring settings for queue user privileges,
printer alert options, multiple queues, and passwords, see NetWare
documentation.
printer alert options, multiple queues, and passwords, see NetWare
documentation.
5
Start up PageScope Light and log in to the Admin mode. On the
Network
tab, select
Common Settings
and then
NetWare
. Configure
the settings described below. For more information, see “Using
PageScope Light” on page 3-31.
PageScope Light” on page 3-31.
6
Load MONITOR.NLM onto the NetWare Server console.
7
Select the connection information. In the active connection field, check
to make sure that the Pserver you created is connected.
to make sure that the Pserver you created is connected.