Hitachi VM-H71A User Manual
Advanced Techniques
49
recorded tape.
Note: Title recording is disabled when you connect the optional AV input
cable to the AV IN/OUT jack to record video and audio from the television or
VCR.
Note: Title recording is disabled when you connect the optional AV input
cable to the AV IN/OUT jack to record video and audio from the television or
VCR.
Recording a Title while Transferring a Tape
1. Connect the camera/recorder to the VCR (p.33).
2. Press the TITLE ON/OFF button on the remote control to turn title on.
3. Use the PLAY button to select a title from memory.
4. Press the TITLE ON/OFF button on the remote control to turn title off.
5. Turn on the VCR and set it to record. Hold down the red button on the
CAM/OFF/VIDEO switch while sliding the switch to VIDEO. Press PLAY
on the camera/recorder.
6. Press the TITLE ON/OFF button on the remote control at the point on
the tape where you wish to record the title.
7. Press the TITLE ON/OFF button on the remote control again to stop
recording the title.
2. Press the TITLE ON/OFF button on the remote control to turn title on.
3. Use the PLAY button to select a title from memory.
4. Press the TITLE ON/OFF button on the remote control to turn title off.
5. Turn on the VCR and set it to record. Hold down the red button on the
CAM/OFF/VIDEO switch while sliding the switch to VIDEO. Press PLAY
on the camera/recorder.
6. Press the TITLE ON/OFF button on the remote control at the point on
the tape where you wish to record the title.
7. Press the TITLE ON/OFF button on the remote control again to stop
recording the title.
Note: Recording the title during tape transfer will erase a portion of your
recorded material.
recorded material.
Dubbing from the Camera/Recorder to a VCR
Connect the camera/recorder to a VCR to copy your or a friend's home
8mm recordings to VHS.
Camcorder to VCR connection Illustration
8mm recordings to VHS.
Camcorder to VCR connection Illustration
1. Connect the AV stereo output cord plug to the AV IN/OUT jack of your
camera/recorder.
2. Connect the AV stereo output cord to the AUDIO IN and VIDEO IN
jacks of your VCR. Connect either the right or left audio plug into your
television if it has only one AUDIO IN jack.
camera/recorder.
2. Connect the AV stereo output cord to the AUDIO IN and VIDEO IN
jacks of your VCR. Connect either the right or left audio plug into your
television if it has only one AUDIO IN jack.
Note: Some VCR's have an S-VIDEO IN jack. Connect the black S-VIDEO
plug to the VCR instead of the yellow VIDEO plug.
plug to the VCR instead of the yellow VIDEO plug.
3. Hold down the red button of the CAM/OFF/VIDEO switch while you
slide the switch to VIDEO.
4. Insert the recorded tape in the camera/recorder and a blank tape into
the VCR. Set the VCR to record.
5. Play the tape from the camera/recorder while recording on the VCR.
slide the switch to VIDEO.
4. Insert the recorded tape in the camera/recorder and a blank tape into
the VCR. Set the VCR to record.
5. Play the tape from the camera/recorder while recording on the VCR.
Note: If the VCR is connected to a television and the VCR/TV selector is set
to VCR, you can monitor the tape being dubbed.
to VCR, you can monitor the tape being dubbed.
Using Synchro Edit
Use synchro edit to record only segments of a previously recorded tape
when dubbing from the camera/recorder to a VCR. This requires an
optional synchro edit cable. The Hitachi VM-H71A uses a flying erase
head to eliminate glitches or rainbow noise that sometimes occurs
when dubbing from the camera/recorder to a VCR. This requires an
optional synchro edit cable. The Hitachi VM-H71A uses a flying erase
head to eliminate glitches or rainbow noise that sometimes occurs