Hitachi VM-H71A User Manual

Advanced Techniques 

 

54

infrared signals. You need to program the camera/recorder remote control 
to send signals that your TV will recognize and respond to. Here's what to 
do: 

 Turn the television on (any channel is okay). 
 Aim the camera/recorder's remote control at your TV set. Hold down the 

CH ( ) button while you press the button corresponding to your brand of 
television as shown in the chart (page 53). 
For example, if you have an RCA television, press CH ( ) and DISPLAY 
at the same time. If this button combination sends a signal that matches 
with your TV, the channel will change on the TV, and you'll know the 
remote is set to control the television. 

 If that button combination does not change the TV channel, go through 

the whole list of button combinations one by one until you find one that 
does change your TV channel. 
Also, if your brand of TV is not listed in the chart, try all the buttons. One of 
them may work for you. 
If the TV channel still doesn't change after going through all the button 
combinations listed, it is likely that you will not be able to program this 
remote control for your TV. 

Hitachi  AVX 

Zenith  

VOL ( ) 

Sony  

ZOOM.(W) 

Magnavox REW 

Sanyo  

PLAY 

Gold Star 1  F.FWD 

Toshiba A/V 

DUB 

Gold Star 2  STOP 

NEC  

PAUSE 

(START/STOP) 

RCA  

DISPLAY 

Panasonic TITLE 

ON/OFF 

Mitsubishi ZOOM.(T) 

JVC  

COUNTER 

RESET 

Sharp  

S.EDIT 

Once programmed, the camera/recorder's remote control is ready to 
control the TV. 

 Press the button of the TV function that you want. 

Be aware that not all of your TV's functions may work even though the 
remote control is correctly programmed.