Hitachi c43wp910tn User Manual

audio visual setup

Press and hold the MENU button for 5

seconds. The INSTALL option in the 

MAIN MENU appears.

Press the cursor down button to select

INSTALL.

Once highlighted, accept selection.

Press the cursor down button to select 

AV SETUP.

Once highlighted, accept selection.

1

2

3

4

5

Use the up/down cursor keys to select AV

to adjust.

Adjust chosen AV by using the left/right

cursor buttons.

6

7

Once highlighted, accept selection.

8

The AV SETUP menu is used as a means of instructing your television to recognise what

external equipment is being  connected to your TV’s scart, S-VHS and/or phono sockets. If you have

any equipment connected to your TV (either permanently, like a VCR, or temporary, like a camcorder)

it is important that your TV recognises which kind of equipment is connected. For VCR’s, camcorders

and LaserDiscs the appropriate AV VCR mode should be set to ON in the menu. This helps to provide

a steady picture when playing back a recorded picture. If an S-VHS or Hi8 piece of equipment is to be

used, these should be connected to  either AV2 or AV3.

It is very important that the AV menu setup is adjusted correctly when connecting external

equipment to your TV - the incorrect setting may lead to picture breaking and splitting. It must

also be noted that when this external equipment is a VCR or camcorder, and your VCR mode

is set to ‘ON’ Progressive Scan is not an option during playback and your TV automatically

displays the picture at 100Hz.