honda-automobiles 2009 cr-v User Manual
CONTINUED
Check the fluid level with the engine
at normal operating temperature.
at normal operating temperature.
Park the vehicle on level ground.
Start the engine, let it run until the
radiator fan comes on, then shut
off the engine. For accurate
results, wait about 60 seconds (but
no longer than 90 seconds) before
doing step 2.
Start the engine, let it run until the
radiator fan comes on, then shut
off the engine. For accurate
results, wait about 60 seconds (but
no longer than 90 seconds) before
doing step 2.
Remove the dipstick and check
the fluid level. It should be
between the upper and lower
marks.
the fluid level. It should be
between the upper and lower
marks.
If the level is below the lower
mark, add fluid into the dipstick
hole to bring it to the level
between the upper and lower
marks.
mark, add fluid into the dipstick
hole to bring it to the level
between the upper and lower
marks.
Insert the dipstick all the way into
the transmission securely as
shown in the illustration.
the transmission securely as
shown in the illustration.
Remove the dipstick (yellow loop)
from the transmission, and wipe it
with a clean cloth.
from the transmission, and wipe it
with a clean cloth.
Pour the fluid slowly and carefully
so you do not spill any. Clean up
any spill immediately; it could
damage components in the engine
compartment.
so you do not spill any. Clean up
any spill immediately; it could
damage components in the engine
compartment.
Always use Honda Genuine
ATF-Z1 (automatic transmission
fluid).
ATF-Z1 (automatic transmission
fluid).
1.
2.
3.
5.
4.
Automatic Transmission Fluid
Ma
int
e
e
na
nce
nce
287
DIPSTICK
UPPER
MARK
LOWER
MARK
MARK
LOWER
MARK
08/07/22 18:22:13 31SWA620 0292
2009 CR- V
Table Of Contents
Main Menu