GE nvi 465 User Manual

Getting Started

  Note: The permanent adhesive disk 

is extremely difficult to remove.

1.  Clean and dry the area where you 

want to place the mounting base.

2.  Select the adhesive disk you want 

to use, and remove one side of the 

backing.

3.  Place the adhesive disk on the bottom 

of the mounting base, and remove the 

other side of the backing.

4.  Place the mounting base so that the 

locking lever is facing you. Position 

the base on the cleaned area. Apply 

pressure to adhere the base to the 

dashboard.

5.  Snap the cradle onto the mounting 

arm.

6.  Slide the mounting arm with cradle 

attached into the mounting base.

7.  Slide the locking lever into the locked 

position.