honda-automobiles gsv190 User Manual

Page of 16
11
Air Index
An Air Index Information hang tag/label is applied to engines certified 
to an emission durability time period in accordance with the 
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to 
compare the emissions performance of available engines. The lower 
the Air Index, the less pollution.
The durability description is intended to provide you with information 
relating the engine’s emission durability period. The descriptive term 
indicates the useful life period for the engine’s emission control 
system. See your Emission Control System Warranty (page 12) for 
additional information.
The Air Index Information hang tag/label must remain on the engine 
until it is sold. Remove the hang tag before operating the engine.
Specifications
GSV160 
GSV190 
Tuneup Specifications 
Wiring Diagram
CONSUMER INFORMATION   
Honda Publications
These publications will give you additional information for maintaining 
and repairing you engine.You may order them from an authorized 
Honda engine servicing dealer.
U.S.A. Distributor’s Limited Warranty
(1) Honda GS and GSV general purpose engines are not covered by
       this warranty when installed on concession type vehicles.
To Qualify for this Warranty:
The Honda general purpose engine must be purchased from a Honda general purpose 
engine dealer or distributor authorized to sell that product in the United States, Puerto Rico, 
or the U.S. Virgin Islands. This limited warranty applies to first retail purchaser and each 
subsequent owner during the applicable warranty time period.
What American Honda Will Repair or Replace Under Warranty:
American Honda will repair or replace, at its option, any part that is proven to be defective 
in material or workmanship under normal use during the applicable warranty time period. 
Warranty repairs and replacements will be made without charge for parts or labor. Anything 
replaced under warranty becomes the property of American Honda Motor Company, Inc. 
All parts replaced under warranty will be considered as part of the original product and any 
warranty on those parts will expire coincident with the original product warranty.
To Obtain Warranty Service:
You must take your Honda general purpose engine, or the equipment in which it is 
installed, together with proof of original retail purchase date, at your expense, to a Honda 
engine dealer or distributor authorized to sell that product in the United States, Puerto Rico, 
or the U.S. Virgin Islands, during their normal business hours. Many Honda engine dealers 
and distributors are listed in the yellow pages of the telephone directory under gasoline 
engines, lawn & garden equipment & supplies, etc.
If you are unable to obtain warranty service, or are dissatisfied with the warranty service 
you receive, take the following steps: First contact the owner of the dealership or distributor 
involved. Normally this should resolve the problem. However, if you are dissatisfied with 
the decision made by the dealership's management, contact the Honda Regional Engine 
Distributor for your area. You can find their name, address, and phone number using the 
dealer/distributor locator on our website at (www.honda-engines.com) or by calling 1-800-
426-7701. If you are still dissatisfied after speaking with the Regional Engine Distributor, 
you may contact the Honda Power Equipment Customer Relations Department of 
American Honda Motor Co., Inc. Refer to page 13 for contact information.
Exclusions:
THIS WARRANTY DOES NOT EXTEND TO PARTS AFFECTED OR DAMAGED BY THE 
PRODUCT IN WHICH THE ENGINE IS INSTALLED, OR BY ACCIDENT AND/OR 
COLLISION, MISUSE, NEGLECT, PARTS WORN BEYOND SERVICE LIMITS DUE TO 
NORMAL WEAR/NORMAL SERVICE LIFE, PARTS AFFECTED OR DAMAGED BY THE 
CONVERSION TO OR USE OF FUEL OTHER THAN THE FUEL(S) WHICH THE 
ENGINE IS ORIGINALLY MANUFACTURED TO USE, POOR OPERATION RELATED TO 
FUEL CONTAMINATION OR FUEL QUALITY, PARTS DAMAGED BY FUEL 
CONTAMINATION, THE INCORPORATION OF, OR USE OF, UNSUITABLE 
ATTACHMENTS OR PARTS, THE UNAUTHORIZED ALTERATION OF ANY PART OR 
ANY CAUSES OTHER THAN DEFECTS IN MATERIAL OR WORKMANSHIP OF THE 
ENGINE. USE OF THE HONDA GENERAL PURPOSE ENGINE FOR RACING OR 
COMPETITION WILL VOID THIS WARRANTY.
Disclaimer of Consequential Damage and Limitation of Implied Warranties:
AMERICAN HONDA DISCLAIMS ANY RESPONSIBILITY FOR LOSS OF TIME OR USE 
OF THE ENGINE, OR THE EQUIPMENT IN WHICH THE ENGINE IS INSTALLED, 
TRANSPORTATION, COMMERCIAL LOSS, OR ANY OTHER INCIDENTAL OR 
CONSEQUENTIAL DAMAGE. ANY IMPLIED WARRANTIES ARE LIMITED TO THE 
DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow 
limitations on how long an implied warranty lasts and/or do not allow the exclusion or 
limitation of incidental or consequential damages, so the above exclusions and limitations 
may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary 
from state to state.
International Warranty
Descriptive Term
Applicable to Emissions Durability Period
Moderate
50 hours (0–65 cc)
125 hours (greater than 65 cc)
Intermediate
125 hours (0–65 cc)
250 hours (greater than 65 cc)
Extended
300 hours (0–65 cc)
500 hours (greater than 65 cc)
Length x Width x Height
14.6 x 13.5 x 14.2 in
(370.5 x 342.5 x 360 mm)
Dry weight
28.2 lb (12.8 kg)
Engine type 
4-stroke, overhead cam, single cylinder
Displacement
[Bore x Stroke]
9.8 cu in (160 cm
3
)
[2.5 x 2.0 in (64 x 50 mm)]
Maximum output 
5.5 bhp (4.1 kW, 5.5 PS) at 3,600 rpm
Maximum torque 
8.41 ft-lb (11.4 N•m, 1.16 kg/m) at 2,500 rpm
Fuel consumption 
0.51 lb/hph (313 g/kWh, 230 g/PSh)
Cooling system 
Forced air
Ignition system 
Transistorized magneto
PTO shaft rotation 
Counterclockwise
Length x Width x Height
14.6 x 13.5 x 14.2 in
(370.5 x 342.5 x 360 mm)
Dry weight
28.7 lb (13.0 kg)
Engine type 
4-stroke, overhead cam, single cylinder
Displacement
[Bore x Stroke]
11.4 cu in (187 cm
3
)
[2.7 x 2.0 in (69 x 50 mm)]
Maximum output 
6.5 bhp (4.8 kW, 6.5 PS) at 3,600 rpm
Maximum torque 
9.74 ft-lb (13.2 N•m, 1.35 kg/m) at 2,500 rpm
Fuel consumption 
0.51 lb/hph (313 g/kWh, 230 g/PSh)
Cooling system 
Forced air
Ignition system 
Transistorized magneto
PTO shaft rotation 
Counterclockwise
ITEM SPECIFICATION 
MAINTENANCE
Spark plug gap
0.028 – 0.031 in (0.7 – 0.8 mm)
Valve clearance (cold)
IN:  0.15 ± 0.04 mm 
EX: 0.20 ± 0.04 mm
See your authorized 
Honda dealer
Other specifications 
No other adjustments needed.
IGNITION 
COIL
SPARK 
PLUG
ENGINE STOP 
SWITCH
Shop Manual
This manual covers complete maintenance and overhaul 
procedures. It is intended to be used by a skilled 
technician.
Parts Catalog
This manual provides complete, illustrated parts lists.
PRODUCTS COVERED BY 
THIS WARRANTY:
LENGTH OF WARRANTY:
(FROM DATE OF ORIGINAL PURCHASE)
PRODUCT
APPLICATIONS
NONCOMMERCIAL/
NONRENTAL
COMMERCIAL
RENTAL
GS & GSV 
Series 
Engines
All
24 months
12 months
3 months (1)