ONKYO dv-sp504e User Manual

Page of 64
 
43
 
HDMI and Progressive Settings
 
This section explains how to turn on the HDMI OUT and 
change the video resolution when your TV or projector 
is connected to the HDMI OUT.
The DVD player supports the following resolutions:
 
Auto:
 
The resolution is automatically set to the native resolu-
tion of the TV connected to the HDMI OUT.
If the DVD player does not support the TV’s native res-
olution setting, the resolution 480p/576p will be used.
 
480p (480p/576p) (default):
 
The setting displayed depends on the country in which 
you purchased the DVD player.
720 
 
×
 
 480p 60Hz or 720 
 
×
 
 576p 50Hz
Also output by the DVD player’s analog video outputs.
With this setting, component video output will be pro-
gressive.
 
720p:
 
1280 
 
×
 
 720p 50/60Hz
Not output by the DVD player’s analog video outputs.
 
1080i:
 
1920 
 
×
 
 1080i 50/60Hz
Not output by the DVD player’s analog video outputs.
 
Tip:
 
These settings can also be changed by using the onscreen 
setup menus (see pages 46, 47).
 
Note:
 
• Be sure to choose a resolution that’s supported by your 
TV. If you select a resolution that your TV doesn’t 
support, there will be no picture.
If your TV supports progressive video, you can set the 
DVD player to progressive and enjoy progressive video 
on your TV. If your TV doesn’t support progressive 
video, set the DVD player to interlaced.
When HDMI output is at 480p/576p, the component 
video output is fixed at progressive and depending on the 
selected resolution there may be no output, so turn off 
the HDMI OUT before changing this setting.
RETURN
SETUP
TOP MENU
MENU
CU
RSOR
PU
SH TO ENTE
R
HDMI
RESOLUTION
RESOLUTION
 
Setting the HDMI
 
1
 
Press the DVD player’s [HDMI] 
button to turn on HDMI.
 
2
 
Press the [RESOLUTION] button 
repeatedly to change the HDMI 
resolution.
 
The first button press displays the cur-
rent resolution onscreen. Press the but-
ton again while the resolution is 
displayed to change the setting. 
Remote
controller
 
Selecting Progressive or Interlaced
 
1
 
Press the DVD player’s [HDMI] 
button to turn off HDMI.
 
2
 
Use the [RESOLUTION] button to 
select progressive or interlaced.
 
The first button press displays the cur-
rent setting onscreen. Press the button 
again while the setting is displayed to 
change the setting.
The PROGRESSIVE indicator appears 
on the display when progressive is 
selected.
Remote
controller
DV-SP504E_En.book Page 43 Wednesday, August 30, 2006 1:55 PM