honda-automobiles 2010 ridgeline User Manual

If you leave the calculated route, 
“Recalculating...” is displayed at the top 
of the screen. The system will 
recalculate the route from your current 
location and direction to the desired 
destination, and then give you a new 
route instruction. This is done 
automatically if you have set 

 to 

 on the 

Setup

 screen (second) (see page

If the 

 option in Setup is set 

to 

, “Off route” appears at the 

top of the screen when you leave the 
calculated route. Say “Recalculate” or 
select 

 whenever you wish the 

system to perform a recalculation.

If you drive more than half a mile from 
a mapped road, “Not on a digitized 
road” appears at the bottom of the 
screen. 

The 

map

 screen starts displaying a 

series of dots (breadcrumbs) to show the 
path you have taken if 

 on the 

Setup

 screen (second) 

is set to 

 (see page

).

By following the dots, you can 
backtrack to the mapped road you 
originally left. “Breadcrumbs” may 
occasionally be displayed in urban 
areas, such as large parking lots in 
shopping malls, or in new subdivisions 
where the roads are not yet in the 
database. In other cases, you may see 
dots if the system temporarily goes off 
route, like in a parking garage where the 
GPS signal is unavailable.

These dots appear only in the 1/20, 1/8, 
1/4, and 1/2 mile (or the 80, 200, 400, 
and 800 meter) map scales.
Use the 

 buttons to change scales 

if necessary.

Tracking continues for approximately 
150 miles; dots at the beginning of the 
trail will start disappearing when you 
exceed that distance. When you reach a 
mapped road, the system stops 
displaying dots.

2010 Ridgeline