GE 25860 User Manual

CAUTION: To reduce the risk of fire or personal injury, use only the 

battery 5-2548 that is compatible with this unit.

1.  Make sure the telephone is OFF (not in TALK mode) before 

you replace battery.

2. Remove the battery compartment cover.
3.  Disconnect the cord attached to the battery pack from 

the jack inside the battery compartment and remove the 

battery pack from the handset.

4.  Connect the new battery pack and insert it in the  

battery compartment.

5.  Put the battery compartment cover back on.
6.  Place handset in the base or handset charge cradle to charge. If you don’t 

charge the handset battery properly (for 16 hours) when you first set up 

the phone and/or when you install a new battery pack, the battery’s long-

term performance is compromised.

NOTE: If the battery is not properly installed in the handset, or if the battery 

pack is not properly connected to the jack inside the battery compartment, “NO 

BATTERY” shows in the display when the handset is placed in the base cradle.

•  Do not burn, disassemble, mutilate, or puncture. Like other batteries of 

this type, toxic materials could be released which can cause injury.

•  To reduce the risk of fire or personal injury, use only the battery listed in 

the User’s Guide.

•  Keep batteries out of the reach of children.
•   Remove batteries if storing over 30 days.

NOTE: The RBRC seal on the battery used in your ATLINKS USA, Inc. 

product indicates that we are participating in a program to collect and 

recycle Nickel Cadmium batteries throughout the United States.  

Please call 1-800-8-BATTERY for information or contact your local 

recycling center.