GE JBP19 User Manual
Using the clock and timer.
Tr
oubleshooting T
ips
Installation Instr
uctions
Customer Ser
vice
Operating Instr
uctions
Safety Infor
mation
The clock must be set for the automatic oven timing
functions to work properly. The time of day cannot be
changed during a timed baking or self-cleaning cycle.
functions to work properly. The time of day cannot be
changed during a timed baking or self-cleaning cycle.
To Set the Clock:
Press the CLOCK pad.
Press the HOUR and MIN. pads.
2
1
CLOCK
Make sure the clock is set to the
correct time of day.
correct time of day.
To Set the Timer:
Press the TIMER ON/OFF pad.
Press the HOUR and MIN. pads until the amount of
time you want shows in the display. The timer will
start automatically within a few seconds of
releasing the pad.
start automatically within a few seconds of
releasing the pad.
To Reset the Timer:
If the display is still showing the time remaining, you
may change it by pressing the HOUR and MIN. pads
until the time you want appears in the display.
may change it by pressing the HOUR and MIN. pads
until the time you want appears in the display.
If the remaining time is not in the display, recall the
remaining time by pressing the TIMER ON/OFF pad and
then pressing the HOUR and MIN. pads until the new
time you want shows in the display.
remaining time by pressing the TIMER ON/OFF pad and
then pressing the HOUR and MIN. pads until the new
time you want shows in the display.
To Cancel the Timer:
Press the TIMER ON/OFF pad once. To cancel the timer
press the TIMER ON/OFF pad again.
press the TIMER ON/OFF pad again.
2
1
TIMER
ON/OFF
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 11 hours and 59 minutes.
operations. The maximum setting on
the timer is 11 hours and 59 minutes.
End of Cycle Tones
Clear the tones by pressing the pad of the function you
are using.
are using.
TIMER
ON/OFF
COOK
TIME
ON/OFF
17
or