Honeywell commercialpro tb7220 User Manual

17

63-2635—03

6. OCCUPIED 1 flashes, denoting the period that is about 

to be edited.

7. Press NEXT, and the start time for that period flashes.

8. Change the start time by pressing the Up and Down 

arrow keys.

9. Press NEXT to edit the heating and cooling setpoints.

10. Continue to cycle through the remaining periods and 

make changes by pressing the NEXT key.

11. When complete, press DONE. SAVING CHANGES 

appears on the screen to indicate changes are being 

saved to the day(s) modified.

12. To exit schedule without saving changes, press CANCEL 

any time.

1. Press CLOCK.

2. Use arrows to set current time.

3. Press DONE.

correctly. If not, see the Advanced Settings section to 

There are three temperature override options:

— Hold Temperature Until

— Override, and 

— Holiday.

HOLD TEMPERATURE UNTIL
Holds the temperature temporarily until the time set by the 

user, or the next scheduled period time.

1. Press the Up or Down arrow next to the temperature to 

adjust. The Hold Until time appears on the screen. The 

time defaults to the next scheduled period start time

2. Press NEXT to adjust the time for the thermostat to 

resume schedule.

NOTE: The installer setup can limit the length of time 

for an override to 1, 2, 3, or 4 hours beyond the 

current time.

3. Press DONE or wait 5 seconds.

4. Press CANCEL or SCHEDULE to cancel “Hold Tempera-

ture Until” and resume the schedule.

OVERRIDE
Changes temperature setting until the next period takes effect. 

For use during Unoccupied periods.

1. Press OVERRIDE. The settings change by default to the 

next Occupied period.

NOTE: Changes are limited to those allowed by the 

lockout level.

2. Press Up or Down arrow to change the override temper-

ature, and NEXT to adjust override time.

HOLIDAY
Changes temperature setting for a designated number of days. 

Press MORE and then HOLIDAY. The screen shows “Hold 

Until 1 DAYS”.

1. Press Up or Down arrow to change the temperature 

desired for the thermostat to override the schedule.

2. Press NEXT to change the desired days for the duration 

of the holiday.

3. To cancel the Holiday Override early, press CANCEL.

. When the thermostat is running the fan, the fan blade symbol 

appears next to FAN to indicate the thermostat has the fan 

on.

NOTE: If the thermostat is not controlling the fan—typical for 

many gas, forced-air heating systems—the fan blade 

symbol 

 will not appear even though the fan may 

be running.

Not all thermostat models require batteries. If the thermostat 

has batteries, a low battery warning (see Fig. 38) flashes on 

the main screen for approximately 30 days.

M22332

Mon

Tue

Wed

Thu

Fri

Sat

Sun

Select Day

Next       Step Cancel

M22333

ADVANCES PERIOD,TIME, 

HEAT AND COOL TEMPERATURES

GOES BACK TO THE

LAST SCHEDULE STEP

EXITS AND SAVES

CHANGES MADE 

TO SCHEDULE

CHANGES TIME 

AND

TEMPERATURES

CHANGES TIME 

AND

TEMPERATURES

Wake Leave

Go Back Next       Step

Done

Mon

Tue

Wed

Thu

Fri

Heat