GE 28111 User Manual

Model 28110 

00016116 (Rev. 2 CAN E) 

06-46 

Printed in China

NOTICE: This product meets the applicable Industry Canada technical 

specifications.
Operation is subject to the following two conditions: (1) This device may not cause 

interference, and (2) This device must accept any interference, including interference 

that may cause undesired operation of the device.
The equipment must be installed using an acceptable method of connection. The 

customer should be aware that compliance with the above conditions may not prevent 

degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance 

facility designated by the supplier. Any repairs or alterations made by the user to this 

equipment, or equipment malfunctions, may give the telecommunications company 

cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of 

the power utility, telephone lines and internal metallic water pipe systems, if present, are 

connected together. This precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but should 

contact the appropriate electric inspection authority, or electrician, as appropriate.
NOTES: This equipment may not be used on coin service provided by the telephone 

company.
Interference Information
This equipment generates and uses radio frequency energy which may interfere 

with residential radio and television reception if not properly installed and used in 

accordance with instructions contained in this manual. Reasonable protection against 

such interference is ensured, although there is no guarantee this will not occur in a 

given installation. If interference is suspected and verified by switching this equipment 

on and off, the user is encouraged to try to correct the interference by one or more of 

the following measures: Reorient the radio/television receiver’s antenna, relocate the 

equipment with respect to the receiver, plug the equipment and receiver into separate 

circuit outlets. The user may also wish to consult a qualified radio/television technician 

for additional suggestions. This equipment has been fully tested and complies with all 

limits for Class B computing devices pursuant to part 15 FCC Rules and Regulations. 

This telephone system meets FCC/Industry Canada standards for Hearing Aid 

Compatibility.

This equipment complies with FCC RF radiation exposure limits set forth for an 

uncontrolled environment. This equipment should be installed and operated with 

a minimum distance of 20 centimeters between the radiator and your body. This 

transmitter must not be co-located or operated in conjunction with any other antenna 

or transmitter.”
For body worn operation, this phone has been tested and meets the FCC RF exposure 

guidelines when used with the belt clip supplied with this product. Use of other 

accessories may not ensure compliance with FCC RF exposure guidelines

Make sure your package includes the items shown here.

1. Locate battery and battery door which are packaged together inside a plastic 

bag and are separate from the handset.

2.  Locate the battery compartment on the back of the handset.
3.  Plug the battery pack cord into the jack inside  the compartment.

4.  Insert the battery pack.
5.  Close the battery compartment by pushing the door up until it snaps into place.
6.  Place the handset in the base  to charge.

1.  Plug the AC power adaptor of the extra charging cradle into the electrical outlet.

2.  Place the handset in the extra charging cradle. The charge indicator turns on, 

verifying the battery is charging. 

3.  Allow the phone to charge for 16 hours prior to first use.

YOU MUST REGISTER THE HANDSET TO THE MAIN BASE BEFORE USE!
After the optional handset has charged for 16 hours on the extra charger, 

NEEDS REGISTRATION shows in the display.

1.  Press the mute/program button. 

PRESS HANDSET PROGRAM shows in the display. (Your handset should be held 

near the base during registration process.)

2.  Press and hold the page button on the base unit until the charge/in use indicator 

flashes.  Press the handset mute/program button. 

 REGISTERING shows in the 

display. 

HANDSET X REGISTERED shows in the handset display, where X is the 

handset number. You may now rename your handset. (Refer to Naming the 

Handset Section.)

1.  Use the touch-tone pad to enter a name (up to 15 characters).

2. Press the mute/program button to save your name. You will hear a confirmation 

tone and the handset name shows in the display.

SEE MARKING ON BOTTOM / BACK OF PRODUCT

RISK OF ELECTRIC SHOCK

            DO NOT OPEN

WARNING: TO

PREVENT FIRE OR

ELECTRICAL SHOCK

HAZARD, DO NOT

EXPOSE THIS

PRODUCT  TO RAIN

OR MOISTURE.

THE LIGHTNING

FLASH AND ARROW

HEAD WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

“DANGEROUS

VOLTAGE” INSIDE

THE PRODUCT.

CAUTION: TO REDUCE THE

RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR

BACK). NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO

QUALIFIED SERVICE

PERSONNEL.

THE EXCLAMATION

POINT WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU  OF

IMPORTANT

INSTRUCTIONS

ACCOMPANYING

THE PRODUCT.

© 2006 Thomson Digital Technologies Ltd. 

Trademark(s) ® Registered

Marque(s) ® déposée(s

)