heat--glo-lifestyle cerona-42 User Manual

Page of 1
Valencia Doors
Models:  Cerona-36 & Cerona-42
HOOK DOOR 
INTO V-SLOTS
MOUNTING BOLTS
HEAT SHIELD SIDE WITH NUTS
FACE SECOND DOOR PANEL
Leave this manual with party responsible 
for use and operation.
Please see Figure 1 for assembly instructions.
Please contact your Heat & Glo dealer with any questions 
or concerns. 
For the location of your nearest Heat & Glo dealer, 
please visit www.heatnglo.com.
Heat & Glo, a brand of Hearth & Home Technologies Inc. 
7571 215th Street West, Lakeville, MN 55044
www.heatnglo.com
Cleaning Instructions for Doors
Use a microfi ber cloth and Windex® Original Glass 
Cleaner or 03M003 Stove Bright® Glass Cleaner to clean 
the door immediately after installation to remove acids 
deposited by the installer or technician.  Spray the cleaner 
onto the microfi ber cloth and carefully wipe the entire 
surface.  The door should be cleaned in this manner 
annually by the homeowner to remove fi ngerprints  or 
other contaminants.  Once oxidation of the paint pigment 
has occurred, cleaning will not restore the original color.  
Heat & Glo  •  Valencia Doors   •  2106-936 Rev. B  •  5/11
This appliance has been supplied with an integral barrier 
to prevent direct contact with the fi xed glass panel. DO 
NOT operate the appliance with the barrier removed. 
Contact your dealer or Hearth & Home Technologies if the 
barrier is not present or help is needed to properly install one.
HOT SURFACES
Glass and other surfaces are hot during 
operation AND cool down.
Hot glass will cause burns.
•  DO NOT touch glass until it is cooled
•  NEVER allow children to touch glass
•  Keep children away
•  CAREFULLY SUPERVISE children in same room as 
fi replace.
•  Alert children and adults to hazards of high temperatures.
High temperatures may ignite clothing or other fl ammable 
materials.
•  Keep clothing, furniture, draperies and other fl ammable 
materials away.
CAUTION! Risk of Cuts or Abrasions. Wear protective 
gloves and safety glasses during installation. 
CAUTION! Do not install damaged components.
Figure 1.
WARNING