ICOM ic-r2 User Manual
14
5
MEMORY CHANNELS
■
Memory bank selection
The receiver has 400 memory channels in 8 banks for stor-
age of often-used frequencies.
age of often-used frequencies.
q
Select memory mode with [V/M].
w
Rotate [DIAL] while pushing [FUNC] to select the desired
memory banks.
memory banks.
• “1” – “3” indicate memory banks 1 to 3; “
♦
” indicates memory
bank 4; “
♦
1” – “
♦
3” indicate memory banks 5 to 7; no bank indi-
cator indicates memory bank 0.
e
Rotate [DIAL] to select the desired memory channel.
■
Memory clear
Unwanted memory channels can be cleared (erased). Before
clearing a memory channel make sure it is no longer needed
as cleared memories cannot be recalled.
clearing a memory channel make sure it is no longer needed
as cleared memories cannot be recalled.
q
Select memory mode with [V/M].
w
Set the memory channel to be cleared with [DIAL].
• Rotate [DIAL] while pushing [FUNC] to select a memory bank or
programmed scan edge channel.
e
Select VFO mode with [V/M] and push [FUNC] + [
(V/M)
MW]
momentarily to indicate the selected memory channel.
• Do not hold [FUNC] + [
(V/M)
MW] for more than 0.5 sec., other-
wise the selected memory channel will be overwritten.
r
Push [FUNC] + [
(MODE)
LOCK] for 2 sec. to clear the se-
lected memory channel.
• 3 beeps sound, then the frequency is cleared.
t
Push [V/M] to return to VFO mode.
MR
FM
MR
FM
MR
FM
Select memory
channel
channel
for 2 sec.
+
FUNC
momentarily
+
FUNC
V/M
MW
V/M
MW
V/M
MW
V/M
MW
MODE
LOCK
[EXAMPLE]: Clearing memory channel 3 (memory bank 0).
FM
MR
FM
MR
1
FM
MR
3
Memory bank 0
Memory bank 1
Memory bank 7