ICOM ic-r2 User Manual

17

6

SCAN OPERATION

■

The scanning range can be set to all frequencies (full scan), a
selected band or between two user-programmed frequencies
(programmed scan).

The programmed scan edges can be programmed in the

same manner as programming regular memory channels.
Program the desired scan edge frequencies in a pair of
programmed scan edge channels in advance. (pgs. 12, 13)

q

Select VFO mode with [V/M].

w

While pushing [FUNC], push [BAND] to enter band edge
set mode.

e

Rotate [DIAL] to select the desired scan edge.

• “ALL” for full scan, “BAND” for band scan or “PROG 0” –

“PROG24” for programmed scan.

r

Push [BAND] to exit band edge set mode; or push [FUNC]
+ [

Y

] or [

Z

] momentarily to start the programmed scan

using the selected edges.

When scanning across the band as below (programmed

scan edges are set across the band), the parameters like
tuning step, receive mode, offset frequency, duplex direc-
tion, etc. are used in each bands’ VFO settings instead of
these scan edges.

Full scan

Band scan

Programmed scan 24
(Scan edge channels
24A and 24b)

Broadcast band

HF band

50 MHz band

VHF avionics band

144 MHz band
300 MHz band
400 MHz band
800 MHz band

1200 MHz band

    0.495 –       1.620 MHz
    1.625 –     29.995 MHz
  30

–   107.995 MHz

108

–   135.995 MHz

136

–   255.095 MHz

255.1

–   382.095 MHz

382.1

–   769.795 MHz

769.8

–   960.095 MHz

960.1

– 1309.995 MHz