honda-automobiles pilot User Manual
13
Starting the Engine
10-minute mode
1.
Push the command button on the transmitter for
1 second or less, then push in the start button
within 2 seconds.
1 second or less, then push in the start button
within 2 seconds.
2.
The transmitter emits two rapid beeps and sends a
signal to start the engine. After starting the engine,
the transmitter emits another sound, and the
REMAINING IDLING TIME indicator is shown on
the display.
signal to start the engine. After starting the engine,
the transmitter emits another sound, and the
REMAINING IDLING TIME indicator is shown on
the display.
1
20-minute mode
1.
After starting the engine, repeat step 1 in
10-
minute mode.
2.
The transmitter emits two rapid beeps and sends a
signal to extend the idling time. After extending the
idling time, the transmitter emits another sound
twice, and the REMAINING IDLING TIME indicator
is shown on the display.
signal to extend the idling time. After extending the
idling time, the transmitter emits another sound
twice, and the REMAINING IDLING TIME indicator
is shown on the display.
2
NOTE
•
•
Note that you cannot return the remote engine
starter system to the 10-minute mode after changing
to the 20-minute mode by operating the transmitter.
starter system to the 10-minute mode after changing
to the 20-minute mode by operating the transmitter.
•
The engine cannot start for 20 minutes even though
you stop the engine within 10 minutes after
exceeding the time to the 20-minute mode.
you stop the engine within 10 minutes after
exceeding the time to the 20-minute mode.
7336050T
REMAINING
IDLING TIME
IDLING TIME
COMMAND
BUTTON
BUTTON
START
BUTTON
BUTTON
ENGINE RUNNING
INDICATOR
INDICATOR
7336060T
COMMAND
BUTTON
BUTTON
START
BUTTON
BUTTON
ENGINE RUNNING
INDICATOR
INDICATOR
REMAINING
IDLING TIME
IDLING TIME