honda-automobiles pilot User Manual
16
5718100S
Stopping the Engine
1.
Push the command button on the transmitter for
1 second or less, then push the stop button within 2
seconds.
1 second or less, then push the stop button within 2
seconds.
2.
The transmitter emits a short beep and sends a
signal to stop the engine. When the engine stops,
the OFF indicator is shown on the display.
signal to stop the engine. When the engine stops,
the OFF indicator is shown on the display.
NOTE
•
•
When the RF signal from the
transmitter does not carry to
the receiver, the transmitter
emits three short buzzer
sounds but no indicator is
shown on the display.
transmitter does not carry to
the receiver, the transmitter
emits three short buzzer
sounds but no indicator is
shown on the display.
•
The engine cannot be stopped
with the transmitter when it was
started using the ignition key.
with the transmitter when it was
started using the ignition key.
•
In some cases the remote transmission range can be
longer than the reception range. Therefore the engine
can be started/stopped, and the remote status may
not be displayed.
longer than the reception range. Therefore the engine
can be started/stopped, and the remote status may
not be displayed.
7336070T
ENGINE-OFF
INDICATOR
INDICATOR
STOP
BUTTON
BUTTON
COMMAND
BUTTON
BUTTON