Hitachi cl2125t User Manual

GB - 17 -

To Stop Automatic Page Change

The teletext page you have selected may contain more

information than what is on the screen; the rest of the

information will be displayed after a period of time.
Press

button to stop the automatic page

change.

Press

button again to allow the next page to be

displayed.

To Select a Subpage Page

Subpage pages are subsections of long Teletext pages

that can only be displayed on the screen one section at

a time.
Select the required Teletext page.
Press

button.

Select the required Subpage page number by press-

ing four digit buttons (e.g. 0001).

Teletext page number will be displayed on the upper

left corner of the screen when the selected page is

found.

To exit Teletext

Press TV button. The screen will switch to TV

mode.

To Display the Time

While watching a TV programme with Teletext trans-

mission press

button. The current time infor-

mation, captured from Teletext will be displayed at the

upper right corner of the screen.

If the programme being watched does not have Tele-

text transmission, only a blue box will be displayed at

the same location.

The time information will disappear after pressing

button again.

When time information is displayed on screen, entering

another menu will remove it, but after leaving that menu

time information will appear again.

Tips

Care of the Screen

Clean the screen with a slightly damp, soft cloth. Do not

use abrasive solvents as they may damage the TV

screen coating layer.

Poor Picture

Have you selected the correct TV system? Is your TV

set or house aerial located too close to the

loudspeakers, non-earthed audio equipment or neon

lights, etc. ?
Mountains or high buildings can cause double pictures

or ghost images. Sometimes you can improve the

picture quality by changing the direction of the aerial.
The picture quality may degrade when two peripherals

are connected to the TV at the same time. In such a

case, disconnect one of the peripherals.

No Picture:

Is the aerial connected properly? Are the plugs

connected tightly to the aerial socket? Is the aerial cable

damaged? Are suitable plugs used to connect the

aerial? If you are in doubt, consult your dealer.
No Picture means that your TV is not receiving any

transmission. Have you pressed the correct keys on the

remote control? Try once more.

Remote Control:

Your TV no longer responds to the remote control.

Press the TV button on the remote control once more.

Perhaps the batteries are exhausted. If so you can still

use the local keys at the front of your TV.
Have you selected the wrong menu? Press TV key to
return to TV mode or press

to return to the

previous menu.

No solution:

Switch your TV set off and on. If this does not work, call

the service personnel; never attempt to repair it yourself.