Hitachi VM-H81A User Manual

Advanced Techniques 

 

53

has been set, the VCR channel is counted up automatically. 

Note: Your VCR should have an infrared remote control. 
Note: If the channel on the VCR does not change with the above operation, 
you need to switch the remote control code of your VCR. Refer to the VCR's 
instruction manual. If the channel still does not change after you have 
changed the VCR's remote control code, the edit remote control cannot 
operate your VCR. 

Hitachi   REVERSE 

Sony 

  PROGRAM 

Panasonic  

FORWARD 

Toshiba   IN 

Mitsubishi  

COPY 

START 

Sanyo 

  OUT 

Sharp  

 

 

NEC  

 

 

JVC  

 

 

Akai 

  A/V 

DUB 

Gold Star 

 

 

PHILIPS  

 

RCA 

  DISPLAY 

Zenith 

  COUNTER 

RESET 

Magnavox  

TITLE 

ON/OFF 

Note: The remote control code is held in memory until it is changed or the 
batteries are replaced. 
Note: Point the remote control straight at the VCR's infrared receiver for 
operation. 
Note: Use the remote control indoors. When the infrared receivers of the 
VCR and camcorder are exposed to direct sunlight or strong artificial light, the 
remote control may not operate correctly. 
Note: The remote control cannot be operated if there is an obstacle between 
the remote control and infrared receiver. Especially, be careful of this during 
dubbing. 
Note: When the edit remote control is connected to the camcorder, the 
buttons marked * in the figure above perform the same operations as those of 
the other remote control provided. 

You can select up to four different scenes or segments to be copied at one 
time.