Hitachi c28w40tn User Manual
signal source entry
20
Press and hold the MENU button for 5
seconds. The INSTALL option in the
MAIN MENU appears.
Press the cursor down button to select
INSTALL.
Once highlighted, accept selection.
Press the cursor down button to select
MANUAL SETUP.
Once highlighted, accept selection.
Use the cursor keys to move the
selection bar over the AV required
to be adjusted.
Select your method of signal source entry
using the up/down cursor buttons.
Once highlighted, accept the selection to
change the signal source and you will see
the selection bar turn red - it is ready to be
changed.
1
2
3
4
5
6
7
8
NOTE: To ensure that analogue events are recorded when placing your TV in
analogue mode it is necessary to place your TV in an ‘active’ standby mode.
This is done by pressing the standby button followed within a second by
pressing the AV button. This ensures that the digital circuitry your analogue
signal passes through is ‘awake’, enabling you to record.
then
...notes on signal source entry
Each piece of external equipment connected to your TV must have its own input socket. It
would also be easier, and more organised, if the external equipment connected also had its own
program number. Signal Source entry allows us to tell the allocated program what
equipment is connected to which socket. This would make the switching between normal TV
operation and the use of connected equipment much smoother.
For example, if you want to connect a games machine to your TV -
1. connect to socket AV2 via a scart lead (see page 11)
2. give your games machine an empty channel number of its own
3. if desired change this channel name (see page 17)
4. give this channel the correct AV signal source (in this case AV2 - option 2, page 26)