Hitachi c28w40tn User Manual

To use headphones with

your TV insert the headphone

jack plug (3.5mm) into the

corresponding socket.

(see sound mode on page 27)

Use this socket, along with

audio in right to obtain sound

from your external equipment

through your TV’s speakers.

Use this socket with an

S-VHS or Hi8 camera to view

your recordings.

Use this in conjunction

with a standard 8mm camera to

see the picture from your

equipment.

Use this socket, along with

audio in left to obtain sound from

your external equipment through

your TV’s speakers.

Connecting a camcorder

to your TV is easy. First, identify

the type of camcorder and its

connecting sockets. If it is a

standard 8mm type camera then

this is likely to have 'RCA' type

sockets. If you have a S-VHS or

Hi8 camera you may have a S-

VHS socket. Open the front

control panel door and connect

your equipment as detailed here.

Switch your TV on and  press the

TV/AV button        on your

handset until AV3 is displayed on

your TV screen. Now begin

playback operation of your

equipment. Alternatively, you

could allocate an individual

channel number for your

camcorder equipment - see

signal source entry on

Important - If you have not already done so, please read television safety on

page 4 before connecting your  television and external equipment.

If digital video broadcasting equipment, computer equipment or video games are to be

connected to this TV, use the AV2  located on the rear of your TV for RGB input.

PLEASE NOTE: Prolonged use of computer equipment or games on this TV may cause permanent

damage to your picture tube. To avoid such damage, reduce the brightness and contrast to an

acceptable level and limit the duration of use of computer equipment.

Before connecting external

equipment, please consult 

AV setup on page 32.