Hitachi 42edt41 User Manual

  Picture
  Audio
  Timer
  Function
  Setup
  Language
     Select
    OK  Set

Function
  Screen Saver 

  Off

  Screen Wipe 

On  60Min.

  Black Side Panel 

  Off

  Video Power Save 

  Off

  Freeze Mode 

  Split

  Default Zoom 

  Panoramic  

  Reset 

 

   Reset

     Select            Set                Return

OK

CH+

CH-

MENU

FUNCTION MENU

CH+

CH-

Function
  Panel Life   

  Normal

  Mode Display 

  Off

  ID Number  

  1

  Inverse 

 

On  60Min.

  Standby White 

  Off

  Gamma 

 

  2.2  

  Reset 

 

   Reset

     Select            Set                Return

Screen Saver

Off           5Min.           10Min.

60Min.       40Min.       20Min.

This moves the picture around the screen in small amounts, at set
intervals, to reduce the panel image retention. This is where
stationary objects, such as screen logos, leave a slight image visible
after they should have disappeared.

Screen Wipe

On

60Min.

This is used to reduce the panel image retention that can occur with
stationary pictures by the white field signal. Select On (continuous
operation) or 60 Min. (time limit operation) and press the OK button.
Press the MENU or RETURN button on the remote control to return to
normal viewing.

Black Side Panel

Off          On

This turns the gray sidebars On/Off when watching normal mode
screen size area. It is always set to Off when the monitor powered
On. It is recommended to set to Off to reduce the panel image
retention.

Video Power Save

Optional (grayed out)

Freeze Mode

Optional (grayed out)

Default Zoom

Optional (grayed out)

Reset

(off the function)

(waiting to reset)

The original factory settings for the items of this Menu page can be
restored by pressing the OK button.

Panel Life

Normal         Extend 1         Extend 2

This function is to suppress the contrast of the screen regardless of
the Contrast setting in the Picture Menu. By this control, power
consumption can be reduced or degradation of a panel can be
mitigated. The order of power consumption is Extend 2 < Extend 1 <
Normal.
If the Contrast setting is changed when this item is set to Extend 1 or
2, it will be changed to Normal automatically.

Mode Display

Off          On

This can display the Input Signal Screen Display every time the input
mode and signal mode are changed.
Set to OFF if the Input Signal Screen Display is not needed when
switching signals.

ID Number

1         2         3         4

7         6         5

Assigns ID nos. to the monitors so that they can be controlled
individually (up to 7 monitors can be controlled).

Inverse

On

60Min.

This function can change each level of RGB signal invert to reduce
the panel image retention. When this function is required to use,
select On (continuous operation) or 60Min. (time limit operation) and
press the OK button. And press the Menu or Return button to exit.

Standby White

Off         15Min.         30Min.

     120Min.         60Min.

This function is also provided against the image retention. If time is
set for this item, the screen changes into the white pattern when the
monitor enters power save mode, and it will continue for the period of
setting time.

Gamma

2.2                       2.8

Normally set to 2.2.

OPERATING INSTRUCTIONS (continued)