honda-automobiles hs520as User Manual
SET-UP
40
2. Pull the clutch cable enough
to insert the “Z” fitting on the
cable through the auger clutch
lever as shown here. Check
the lever as shown on page .
cable through the auger clutch
lever as shown here. Check
the lever as shown on page .
3. Install the starter bracket using the hardware removed from step 2
on the previous page. For the HS520AS, snap the starter rope into
the rope guide on the handlebar and install the two cable ties. Trim
the cable ties to a length of 3/8 inch (10 mm).
the rope guide on the handlebar and install the two cable ties. Trim
the cable ties to a length of 3/8 inch (10 mm).
“Z” FITTING
AUGER
CLUTCH
LEVER
CLUTCH
LEVER
HS520AS
HS520A
STARTER
ELECTRIC
STARTER
BRACKET
STARTER
BRACKET
FLANGE
NUT
CURVED
HEAD BOLT
HEAD BOLT
ROPE GUIDE
FLANGE NUT
CURVED
HEAD BOLT
HEAD BOLT
CABLE TIE (2)
HS520.book Page 40 Monday, May 14, 2001 12:36 PM