honda-automobiles hs520a User Manual
OPERATION
14
2. If the engine is cold, pull
the choke knob out to the
CLOSED position.
3. Start the engine.
Electric Start (AS model only):
a. Connect an extension cord to the starter box first, then to a 120
volt ac outlet.
To minimize the possibility of potentially dangerous electrical
shock, always use a 3-conductor power cord with a power
rating of no less than 15 amps. Also, be sure that the outlet you
are using is properly grounded.
shock, always use a 3-conductor power cord with a power
rating of no less than 15 amps. Also, be sure that the outlet you
are using is properly grounded.
Do not connect and disconnect the power cord with wet hands.
Be sure to hold the plug when
disconnecting the power cord from the
electrical outlet or starter box. Do not
disconnect by pulling on the power cord.
disconnecting the power cord from the
electrical outlet or starter box. Do not
disconnect by pulling on the power cord.
b. Turn the engine switch to the ON position.
CLOSED
120 VAC OUTLET
3-CONDUCTOR EXTENSION CORD
STARTER BOX PLUG
ON
HS520.book Page 14 Monday, May 14, 2001 12:36 PM