Hitachi 42pd3200 User Manual
- 8 -
Before Switching On Your TV
Power Connection
IMPORTANT: The TV set is designed to op-
erate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the
After unpacking, allow the TV set to reach the
ambient room temperature before you con-
nect the set to the mains.
Connections To The Aerial Input
Socket
9+)8+)
:
5($52)7+(79
&$%/(79
Connect the aerial or cable TV plug to the
Aerial input socket located at the rear of the
TV and connect the cable plug coming out
from the TV out socket located on the de-
vices (VCR, DVB etc.) to this socket as well.
How To Connect Other Devices
IMPORTANT: Switch off the TV before con-
necting any external device.
Sockets for external connections are at the
Sockets for external connections are at the
rear side of the TV. For connection of other
devices via Scart refer to the manuals of the
related devices.
Inserting Batteries In The Remote
Control Handset
Remove the battery cover located on the
back of the handset by gently pulling down-
wards from the indicated part.
Insert two AA/R6 or equivalent type batteries
inside. Place the batteries in the right direc-
tions.
Replace the battery cover.
NOTE: Remove the batteries from remote
control handset when it is not to be used for
a long period.Otherwise it can be damaged
due to any leakage of batteries.
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power supply cord to the sys-
1- Connect the power supply cord to the sys-
tem. Press On/Off switch at the bottom
right side of the TV. Then the TV switches it-
self to stand-by mode and the led on the
front of the TV becomes Red.
2- To switch on the TV from stand-by mode
either:
Press a digit button on the remote control so
that a programme number is selected,
or,
Press the " " or " " button at the bottom of
or,
Press the " " or " " button at the bottom of
the TV or press the P- or P+ button on
the remote control, so that last mode
switched off is selected.
By either method the TV will switch on and
By either method the TV will switch on and
the led becomes green.
To switch the TV off:
Press the (stand-by) button on the re-
mote control, so the TV will switch to stand-
by mode and the GREEN LED will become
RED.
To power down the TV completely, press
On/Off switch ,
or,
Unplug the power cord from the mains
On/Off switch ,
or,
Unplug the power cord from the mains
socket.
01-ENG-4230-CLE967 UK-HITACHI PLASMA TRIDENT(LG)-50075355.p65
20.03.2006, 17:27
8