honda-automobiles 2009 civic hybrid User Manual

With the State selection, the display 
changes to the Select a state screen.

After you select the desired state, the 
display changes to a map of the state, 
with the crosshairs located near the 
middle.

The yellow box indicates the area you 
will see when you click on the current 
map with the Interface Dial. The scale 
will decrease each time you push in on 
the Interface Dial, until Select a 
destination appears at the top of the 
screen.

Use the Interface Dial to move the 
crosshairs to the area of the state close 
to your intended destination. If desired, 
rotate the Interface Dial knob to 
change the map scale. When you have 
the crosshairs in the desired area, push 
in on the Interface Dial. The address 
of the location you have selected will 
appear at the top of the screen.

If this is the desired address, push in on 
the Interface Dial again. If not, use the 
Interface Dial to reposition the 
crosshairs, then push in on the 
Interface Dial again to display the new 
address.

If you selected a single icon or road 
segment, select Set as Dest. to 
calculate a route to the selected 
destination. If you selected multiple 
icons within the cursor radius, select an 
item from the list. Then select OK to 
calculate a route to the selected 
destination.