honda-automobiles h3000 series User Manual
1. DEALER INSTALLATION INSTRUCTIONS
MULCHING KIT CONTENTS
Mulching Blade
Swirl Guide A
Swirl Guide B
Cover Plate
6x40mm
Flange Bolts (2)
6x55mm
Flange Bolt (1)
8 x 3 5 m m
Flange Bolts (2)
6 mm
Flat
Washers
(6)
8 mm
Flat
Washers
(4)
6 mm Lock
Nuts
(3)
8
mm Lock
Nuts
(4)
MULCHING KIT INSTALLATION
The mower deck must be removed from the riding
mower to install the mulching kit. Refer to deck
removal and installation instructions in the
owner's manual or shop manual.
removal and installation instructions in the
owner's manual or shop manual.
Installation requires drilling additional bolt holes.
For your safety, wear eye protection when
For your safety, wear eye protection when
operating power tools.
1.
Remove the blade, blade holder, and
discharge chute (or lower chute
if equipped
with the grass-bagging kit). Use a wooden
block to prevent the blade from turning when
removing the bolts.
removing the bolts.
BLADEWASHER
12
x
25
mm
FLANGE
12
mm
LOCK
WASHER
BLADE HOLDER B
BLADE HOLDER A
H3000 Series Model Shown
2.
Clean and inspect the mower deck. The deck
must be free
must be free
of dents and deformities for the
mulching kit to fit properly.
2
I