honda-automobiles h1000 series User Manual
1.
DEALER INSTALLATION INSTRUCTIONS
7. Install a 6
x
40 mm flange bolt, 6 mm washers,
and a 6 mm lock nut in the first hole, as shown.
Tighten the 6 mm nut and bolt to a torque
value of 7.2 ft-lb (1.0 kg-m).
value of 7.2 ft-lb (1.0 kg-m).
To
assure a good fit, mower deck holes must
be drilled in sequence, and swirl guide A must
be secured with nuts and bolts before drilling
be secured with nuts and bolts before drilling
the next hole.
4
6 mm
WASHERS
8.
Drill the second hole in the mower deck, using
the hole in swirl guide A as a drill guide.
Use a 1/4 inch (6.2
-
6.4 mm) drill. Wear eye
protection when drilling.
Remove any burrs from the hole.
9.
Install a 6 x 40 mm flange bolt, 6 mm washers,
and
a
6 mm lock nut in the second hole, as
shown.
Tighten the 6 mm nut and bolt to a torque
value of 7.2 ft-lb (1.0 kg-m).
value of 7.2 ft-lb (1.0 kg-m).
SWIRL GUIDE A
6 x 4 0
FLAN(
FLAN(
FLAT
SECOND HOLE
10.
Drill the third hole in the mower deck, using
the hole in swirl guide
A
as a drill guide.
Use a 1/4 inch (6.2
-
6.4 mm) drill. Wear eye
protection when drilling.
Remove any burrs from the hole.
1
1. Install a 6
x 55
mm flange bolt, 6 mm washers,
and a 6 mm lock nut in the third hole, as
shown.
shown.
Tighten the 6 mm nut and bolt to a torque
value of 7.2 ft-lb (1.0 kg-m).
value of 7.2 ft-lb (1.0 kg-m).
6 mmFLAT
WASHERS
6 x 55 mm
FLANGE BOLT
FLANGE BOLT
6
mm
LOCK
\