Microboards Technology gx-1 User Manual

• The GX-1 Disc Publisher and Zulu2 

 

You will see an entry labeled 
“USB Serial Port (COMx)” entry 
for each GX-1 Disc Publisher you 
have installed.  The COMx will 
be the COM port number to be 
entered into the Configure 
screen. 

 

Select the COM port as found on 
the Computer Management 
screen. 

 

Next, select the recorder. 

 

Finally, select the Printer. 

 

To confirm you have made the correct selection, you 
can click on the T box next to each item, as follows:   

• When 

the 

T is pressed for the COM Port, the 

disc flippers will move up and down. 

• When 

the 

T is pressed for the recorder, the 

tray will open and then close. 

• When 

the 

T is pressed for the Printer, the 

belts will move in reverse. 

•  Once you have completed your selections, 

check the Don’t show this window again 
box to bypass this step when launching 
Zulu2 again.  You will be able to reset this 
option should it be necessary to configure the 
system again. 

Click the OK button. 

The system will now initialize the GX-1 Disc Publisher.  The belts will be cleared of any discs and any 
discs in the recorders will be removed and rejected. 

Once initialization is complete, the system is ready for use. 

Please see the Zulu2 for Microboards Disc Publishers manual for more information on using Zulu2.