honda-automobiles tl5040 User Manual

I 

1 

2 

3 

4 

5 

Install female end of driveline onto Tiller 

gearbox input shaft and secure with proper 

quick locking device Fig. 

3. 

Attach three point hitch mast struts and 
driveline shield to tiller frame using M12x30 

mm. bolts, lock washers and nuts Fig.2. 

Attach mast braces to mast struts using 

M12x90mm bolt, spacer, 

nut and jam nut 

Fig. 4. 

Secure mast brackets onto clamps on gearbox 

housing using a M12x80mm spacer, nut and 

jam nut. 

Install hitch pin brackets onto frame using 

two 

M12x9Omm bolts, with lock washers. Fig. 5 

Brackets must be installed with the weld nut 

Fig. 3 

on top side maintaining a distance 

of 

19-3/4” 

(501 

mm) centered between brackets. Fig. 6. 

6    Check gearbox oil level per instructions in 

LUBRICATION section. 

7    Make certain all safety shields and safety 

labels 

are 

in place and in good condition. 

8    Check the tiller tine bolts to ensure they are 

tight. 

Torque to 

73 ft. lbs. (10.1 

Km) 

Fig. 

7. 

parts of the driveline Fig. 

8. 

grease, ensure the tiller tine shaft and the 
driveline are lubricated Fig. 9 

9    Apply a coating of grease to the telescoping 

10 Using a grease gun and a multi-purpose 

Fig. 6