Hitachi c32w35tn User Manual

Press and hold the MENU button for 5

seconds. The INSTALL option in the 

MAIN MENU appears.

Press the cursor down button to select

INSTALL. 

Once highlighted, accept selection.

Press the cursor down button to select

MANUAL  SETUP.

Once highlighted, accept selection.

Use the cursor keys to move the

selection bar over the AV required 

to be adjusted.

Select your method of signal source

entry using the up/down cursor buttons.

Once highlighted, accept the selection to 

change the frequency and you will see the 

selection bar turn red  - it is ready to be

changed.

AV1 is the signal source used when connecting

external equipment (eg. VCR) through a scart lead 

to the AV1 socket at the rear of your TV.

1

2

3

4

5

6

7

8

Each piece of external equipment connected to your TV must have its own input socket. It

would also be easier, and more organised, if the external equipment connected also had its own

channel number. Signal Source entry allows us to tell the allocated channel what equipment is

connected to which socket. This would make the switching between normal operation and the

connected equipment much smoother.

For example,  if you want to connect a games machine to your TV - 

1. connect to socket AV2 via a scart lead (see page 10).

2. give your games machine an empty channel number of its own.

3. if desired change this channel name (see page 23).

4. give this channel the correct AV signal source (in this case AV2 - option 2, page 26).