HannsG hsg 1065 User Manual

                                                                                                                                        User’s Manual   

 

•

Press this button to switch ON/OFF of monitor’s power.   
 

•

Green — 

Power 

On 

mode. 

Orange — Power Saving mode. 
 

•

1. Turn the OSD menu on/off or return to the previous menu. 
2. Exit OSD menu when in volume OSD status. 

 

•

1. Adjust Brightness and volume when the OSD is off. 
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is 

activated. 

 

•

【

 i 】Button:  《Digital Input Models》 

    1. Press【 i 】to enter Source selections. (Selections include VGA, HDMI, etc. The actual 

selections may very depending on the models. This function is only available in models with 
digital inputs) 

2. The OSD menu is used as《confirmation》function during start-up. 
3. Press and hold this button more than 3 seconds will start  「Auto Adjust」  function when using 

VGA input only. (The auto adjustment function is used to optimize the  「horizontal position」, 
「

vertical position」,「clock」,and  「phase」.) 

 

•

    1. Restore Brightness and Contrast defaults: 
        To reset both the Brightness and Contrast to their default values, press the 【▲】and 【▼】 keys 

at the same time. 

    2. ASPECT RATIO: 
        Press【MENU】+【▼】key to change to  「FULL」mode or  「FIT」mode. 
    3. Change Resolution: 
        For similar screen display resolutions (see table below), the screen resolution can be changed by 

pressing the【MENU】+【▲】button to achieve the optimal display quality. 

 

解析度

640x480@60Hz ↔ 720x480@60Hz 

1024x768@70Hz ↔ 1280x768@70Hz 

1280x768@60Hz ↔1360x768@60Hz 

1400x1050@60Hz ↔ 1680x1050@60Hz 

1400x1050@RB 60Hz ↔ 1680x1050@RB 60Hz 

**  以上顯示解析度需視購入機型而定 

 

11