Havis-Shields c-tcb-10 User Manual

 

3/16” Allen wrench 
3/8” Standard Socket Set 
3/8” Metric Socket Set 

3/8” Ratcheting Wrench 
Powered drill w/ drill bit set 
Standard Open-end wrench set 

 
 

 

 

1 

Pole support assembly 

CM93071-10 

1 Telescoping 

pole 

CM93072-1 

1 

Under floor plate 

CM93132 

1 

Lateral support brace 

CM93148 

1 

Side support brace  

CM93149 

2 

¼-20 Nylock nut 

GSM30016 

1 

5/16-18 Nylock nut 

GSM30017 

2 

3/8-16 Nylock nut 

GSM30018 

4 

¼” Flat washer 

GSM31005 

1 

5/16” Flat washer 

GSM31006 

5 

3/8” Flat washer 

GSM31007 

2 

¼-20 x ¾” Hex head bolt 

GSM33001 

2 

3/8-16 x ¾” Hex head bolt 

GSM33027 

1 

3/8-16 x 1 ¼” Hex head bolt 

GSM33029 

 

! 

 Read all instructions before installing any Havis-Shields Equipment Corp products. 
 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! 
 Use hardware provided with install kit 

 

1.  Confirm receipt of all hardware and components. 
2.  Remove front passenger seat base trim. 

 

•  Align pole support assembly’s slotted hole with similar slot on seat base and loosely 

attach using 3/8-16 x ¾” bolt, washer and nut.  

•  Loosely attach smaller slot on assembly to seat base using ¼-20 x ¾”   

•  Repeat these processes attaching the side support brace to passenger seat base.  

•  Now loosely attach the side support brace and lateral (forward) support base to pole 

assembly using 5/16” Nylock nut.