Honeywell pro th2110d User Manual
PRO TH3110D Non-programmable Digital Thermostat
3
Remove the wallplate from the ther-
mostat as shown at left, then follow
directions below for mounting.
mostat as shown at left, then follow
directions below for mounting.
1
Pull wires through wire hole.
2
Position wallplate on wall, level and
mark hole positions with pencil.
mark hole positions with pencil.
3
Drill holes at marked positions as
shown below, then tap in
supplied wall anchors.
shown below, then tap in
supplied wall anchors.
4
Place wallplate over anchors, insert
and tighten mounting screws.
and tighten mounting screws.
Grasp top and bottom of wallplate
and pull to remove from thermostat.
and pull to remove from thermostat.
Drill 3/16” holes for drywall.
Drill 7/32” holes for plaster.
Drill 7/32” holes for plaster.
Wall anchors
Mounting screws
Wire hole
Wallplate installation