Hitachi VM-H720A User Manual

Advanced Techniques 

- 43 - 

Note: The linear time counter with the memory feature in the viewfinder can also be 
displayed on the connected television. 

Aiming remote Illustration 

Note: Use the wireless remote control within the range of the infrared receiver of the 
camcorder shown above. 
Note: The wireless remote control may not function in strong light such as direct sunlight or 
very bright artificial lighting. 
Note: Clear a direct path from the wireless remote control to the infrared receiver. The 
wireless remote control won't work if an obstacle blocks the infrared rays. 
Note: The remote control code of this camcorder is Hitachi code VCR2. If you have a VCR 
with the same code your Hitachi VCR may malfunction when you use the camcorder's 
wireless remote control. 

Create titles easily and personalize your recordings while keeping a permanent visual record of 
what is contained on a tape. The camcorder can store a title in its memory. A title stored in 
memory can be displayed and recorded at any time. A title contains two lines of up to 16 
characters per line. The camcorder contains 47 different characters for creating a title. When 
creating and recording a title, use the TITLE ON/OFF button on the remote control. (When 
creating a title in the CAM mode, the DATE/TITLE button of the camcorder can be used instead 
of the TITLE ON/OFF button on the remote control. "  TITLE" should be displayed in the 
viewfinder at this time.) 

Note: Be sure to insert the clock battery before creating a title. Although a title can be created 
without the clock battery inserted, it will disappear when the battery providing power to the 
camcorder is removed. 

 

1. Connect the camcorder to a power source. 
2. Hold down the red button on the CAM/OFF/VIDEO switch and slide it to either CAM or VIDEO. 
3. Press the TITLE ON/OFF button on the remote control and a flashing cursor appears in the 
viewfinder.