Hanna Instruments hi 9271 User Manual
3 3
Allow about 5 cm (2") of paper to exit from the printer and then
replace the cover.
replace the cover.
TO RESET THE PRINTER
Take the battery cover off by
removing the screws on the
back of the meter. Using a blunt
pencil press the black reset but-
ton. This will reset the printing
mechanism.
Before replacing the battery
cover, investigate likely cause
of the printer jam (e.g. the pa-
per might be caught under the
cover preventing the paper from
advancing).
Replace the battery cover and
tighten the screws.
removing the screws on the
back of the meter. Using a blunt
pencil press the black reset but-
ton. This will reset the printing
mechanism.
Before replacing the battery
cover, investigate likely cause
of the printer jam (e.g. the pa-
per might be caught under the
cover preventing the paper from
advancing).
Replace the battery cover and
tighten the screws.
-
-
+
+
1.5V
1.5V
-
-
+
+
1.5V
1.5V
SCREW
POTS
RESET