Hanna Instruments hi 98701 User Manual

19

the value will be stored in the lot 00 (log on demand data area). If
the print function is enabled, a printout is also produced providing the
following information:

a - Date
b - Sample number
c - Time
d - Readings ("----" means out of

range or probe not connected)

Note: When the Log on demand data area is full and the LOG key is

pressed, the sample will not be stored and the LCD will display
"FULL". In this case it is necessary to delete the Log on demand
data to proceed.

TO VIEW LOGGING INFORMATION

If the ALT and LOT INFO keys are pressed during logging, the meter
displays for a few seconds the current lot and the number of logged
samples. The meter then returns to normal operational mode auto-
matically.

If ALT and LOT INFO are pressed while the meter is not logging, the
last logged lot in the lower LCD and the number of logged samples in
the upper LCD are displayed. It is then possible to scroll through the
following lot information with the 

 key:

• lot starting date (dd.mm)
• lot starting year
• lot starting time (hh.mm)
• lot logging interval
• logged channels (HI 98804 only)
By pressing the 

 key again, the meter displays the number of

logged samples again.
When the number of logged samples is displayed, it possible to pass
to another lot with the 

 and  keys. Press  to view the older

lots or 

 to view the more recent ones.

If 

 is pressed when the last lot is displayed, the meter displays the

lot 00 (log on demand). By pressing the 

 key again, the meter will

pass to the oldest lot.

Note For lot 00, only the number of samples will be displayed.
To exit from the logging info viewing mode press ALT and LOT INFO
again or CH/TIME (HI98804 only) or TEMP/TIME (HI98801 only).