Hanna Instruments hi 983317-0 User Manual
Instruction Manual
HI 983317-0
HI 983317-1
HI 983317-1
HI 98331700
Panel-Mounted
EC Indicators &
Controllers
M a n u f a c t u r e r s s i n c e 1 9 7 8
These Instruments are in
Compliance with the CE Directives
Hanna Instruments reserves the right to modify the design, con-
struction and appearance of its products without advance notice.
struction and appearance of its products without advance notice.
WARRANTY
These meters are warranted for two years against defects in work-
manship and materials when used for their intended purpose and
maintained according to instructions. The probe is warranted for a
period of six months. This warranty is limited to repair or replacement
free of charge.
Damages due to accident, misuse, tampering or lack of prescribed main-
tenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of pur-
chase, serial number and the nature of the failure. If the repair is not
covered by the warranty, you will be notified of the charges incurred. If
the instrument is to be returned to Hanna Instruments, first obtain a
Returned Goods Authorization Number from the Customer Service depart-
ment and then send it with shipment costs prepaid. When shipping any
instrument, make sure it is properly packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty card
within 14 days from the date of purchase.
manship and materials when used for their intended purpose and
maintained according to instructions. The probe is warranted for a
period of six months. This warranty is limited to repair or replacement
free of charge.
Damages due to accident, misuse, tampering or lack of prescribed main-
tenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of pur-
chase, serial number and the nature of the failure. If the repair is not
covered by the warranty, you will be notified of the charges incurred. If
the instrument is to be returned to Hanna Instruments, first obtain a
Returned Goods Authorization Number from the Customer Service depart-
ment and then send it with shipment costs prepaid. When shipping any
instrument, make sure it is properly packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty card
within 14 days from the date of purchase.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner, Hanna Instruments
Inc., Woonsocket, Rhode Island, 02895 , USA.
without the written consent of the copyright owner, Hanna Instruments
Inc., Woonsocket, Rhode Island, 02895 , USA.
Dear Customer,
Thank you for choosing a Hanna product. This
manual will provide you with the necessary infor-
mation for the correct operation of the meter. Please
read it carefully before using the meter. If you need
additional technical information, do not hesitate to
e-mail us at tech@hannainst.com.
These instruments are in compliance with the
directives.
Thank you for choosing a Hanna product. This
manual will provide you with the necessary infor-
mation for the correct operation of the meter. Please
read it carefully before using the meter. If you need
additional technical information, do not hesitate to
e-mail us at tech@hannainst.com.
These instruments are in compliance with the
directives.
PRELIMINARY EXAMINATION
HI 983317-0, HI 983317-1 and HI 98331700 are
conductivity indicators and controllers with a relay output
designed for simplicity of use in a wide range of applica-
tions.
HI 98331700 is provided with a DC/DC converter which
isolates the measure system from the external power sup-
ply.
The models are panel mounted with membrane keypads on
the front panel and an easy-to-read LCD display.
All the meters automatically compensate for the tempera-
ture variation. The probe is easy to clean and requires little
maintenance.
Measurements are highly accurate and the meters can be
calibrated at one point.
Power supply, wiring and selection are made via the plug-
in terminal blocks on the rear panel.
LED indicators on the front panel identify whether the
controller is in set or measurement mode, and dosing
mode.
conductivity indicators and controllers with a relay output
designed for simplicity of use in a wide range of applica-
tions.
HI 98331700 is provided with a DC/DC converter which
isolates the measure system from the external power sup-
ply.
The models are panel mounted with membrane keypads on
the front panel and an easy-to-read LCD display.
All the meters automatically compensate for the tempera-
ture variation. The probe is easy to clean and requires little
maintenance.
Measurements are highly accurate and the meters can be
calibrated at one point.
Power supply, wiring and selection are made via the plug-
in terminal blocks on the rear panel.
LED indicators on the front panel identify whether the
controller is in set or measurement mode, and dosing
mode.
GENERAL DESCRIPTION
FUNCTIONAL DESCRIPTION
FRONT PANEL
Keypad
SET
SET
To display
setpoint
setpoint
MEAS
To display
measurement
measurement
Trimmers
CAL
CAL
For calibration
SET
To adjust
setpoint
setpoint
LEDs
SET
SET
ON when LCD displays the set value
MEAS
ON when LCD displays the measured value
ALARM
ON when alarm contact is activated
REAR PANEL
1. Power Supply:
HI 983317-0 HI 983317-1
HI 98331700
HI 98331700
12 VDC 115/230 VAC
L1:
Positive 230 VAC
L2:
Negative 115 VAC
L3:
-------- Neutral
L4:
--------- Protection Earth
Note: the power input is internally protected by a 400 mA fuse
2. Alarm Contact: A1, A2.
This contact acts as a switch for the power. The contact
has to be protected outside by the user.
has to be protected outside by the user.
73mm
2.87"
79mm
3.11"
42mm
1.65"
49mm
1.93"
95mm MIN
3.74"
76mm
3"
0.25/4mm
0.01/0.160"
79mm
3.11"
ADJUSTABLE
LOCATION
BRACKET
LOCATION
BRACKET
SET
MEAS
SET
ALARM
CAL
mS
0 ...10.00 mS
Panel-mounted unit assembling view
HI 740146
HI 983317 LAYOUT
Front view of the
panel-mounted unit
panel-mounted unit
Side view of the
panel-mounted unit
Supplied adjustable
location brackets al-
low the controller to
slide into the cutout
and will hold the unit
securely in place. 95
mm (3.74") is the mini-
mum amount of space
required to install the
controller.
panel-mounted unit
Supplied adjustable
location brackets al-
low the controller to
slide into the cutout
and will hold the unit
securely in place. 95
mm (3.74") is the mini-
mum amount of space
required to install the
controller.
3. Probe Connection: follow the above diagram and connect the
colored wires of probe cable as indicated. It is recommended
to connect the shield (P5) to avoid any interference.
colored wires of probe cable as indicated. It is recommended
to connect the shield (P5) to avoid any interference.
Remove the instrument from the packing material
and examine it carefully. If any damage has oc-
curred during shipment, immediately notify your
Dealer or the nearest Hanna Customer Service Cen-
ter.
The meter is supplied with:
• Instruction manual;
• Mounting brackets.
Note: Conserve all packing material until the in-
and examine it carefully. If any damage has oc-
curred during shipment, immediately notify your
Dealer or the nearest Hanna Customer Service Cen-
ter.
The meter is supplied with:
• Instruction manual;
• Mounting brackets.
Note: Conserve all packing material until the in-
strument has been observed to function correctly. Any
defective item must be returned in its original pack-
ing.
defective item must be returned in its original pack-
ing.