Honeywell av8or User Manual
AV8OR User’s Guide Aviation Mode Operation
VFR Moving Map Function
VFR Moving Map Function
Pub. No D200803000008 Page 3-27 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Figure 3-27: Map – Airport information
For Nearest Airports, tapping the AIRPORT FILTER soft key allows
the user to configure the airport filter by setting the minimum runway
length and surface requirements. The filter will not allow airports
below the minimum requirements to be displayed in the list.
the user to configure the airport filter by setting the minimum runway
length and surface requirements. The filter will not allow airports
below the minimum requirements to be displayed in the list.
Figure 3-28: Map - Airport Filter
When the user has selected (highlighted) the nearest point in the
desired destination list, the user taps the
soft key. The system
sets a new course from the aircraft’s present position directly to the
desired nearest point’s position and shows the new Direct-To course
on the map.
desired nearest point’s position and shows the new Direct-To course
on the map.
To cancel an active Direct-To navigation, tap the soft key, tap the
Clear soft key on the virtual keyboard and then tap the Enter soft
key.
Clear soft key on the virtual keyboard and then tap the Enter soft
key.