Viking D3 User Manual

34

E

Charcoal Filter, which was installed in your Built-in Microwave Hood, 

is used for nonvented, recirculated installation. The filter should be 

changed every 6 to 12 months depending on use.
1.  Disconnect power to the oven at the circuit breaker panel or by 

unplugging.

2.  Remove the two top louver mounting screws. (See illustration.)
3.  Pull the louver away from the unit.
4.  Remove the charcoal filter holder by removing the center mounting 

screw.

5.  Change the charcoal filter.
6.  Replace the filter holder and center mounting screw.
7.  Carefully push the louver back into place and replace the screws 

removed in step 2. 

Louver

Charcoal filter

(white side faces front)

Screw

Screw

Screw

Replacing Filter