Kodak easyshare 5500 User Manual

Product Overview 

The printer is turned off. 

Press the On/Off button to turn 
the printer on. 

The Printer does not have power 
applied. 

Check the light on the power 
cord. 

Light is off. 

The printer needs attention. 

Check to see if the Photo Tray 
light is on. If the Photo Tray light 
is on for more that 20 seconds 
and the On/Off light does not 
come on, disconnect the power 
for 5 seconds and reconnect the 
power. If the Photo Tray light 
does not go out after 20 seconds 
and the On/Off light comes on, 
contact Kodak for assistance. 

Light is a steady green. 

The printer is properly powered 
up, on, and ready. 

None 

The printer is busy. 

None: Normal operation when 
performing a print, copy, scan, 
fax, or other job requests. 

Light is a flashing green. 

The printer is initializing. 

None:  Please wait and allow the 
printer to complete the 
initialization process (about 30 
seconds). If the flashing green 
persists, you may have an issue 
with the printer. Visit Kodak.com 
for additional troubleshooting 
steps or contact your local 
Kodak Call Center. 

Light is a flashing yellow. 

The printer has detected an error 
condition. 

Disconnect power for 5 seconds 
and reconnect power. If the 
condition persists, please check 
the LCD display for additional 
information.  Contact Kodak 
service for assistance. 
Also check the status monitor on 
your computer for a message. 

Light is a flashing red. 

The printer has detected an error 
condition that needs your 
attention. 

Check the LCD display or status 
monitor on your computer for a 
message. 

Flashing a rotating pattern of 
red, yellow, and green. 

The printer has not detected that 
a Printhead is installed. 

Please install a Printhead and 
ink cartridges. 

 

User’s Guide 

5