Cissell cissiman38 User Manual

Page 15

CISSELL STEAM-AIR FINISHER

INSTRUCTIONS FOR

INSTRUCTIONS FOR ADJUSTING HEIGHT

ADJUSTING HEIGHT

OF REVOL

OF REVOLVING FORM

VING FORM

(Model FM** and Model FG2)

Should the revolving form “drag” on the base rather than turn freely, the form must be
raised.

Conversely, if the revolving form hides too high above the base, permitting steam to
escape from the space between the form and base, the form must be lowered.

WHEN AN ADJUSTMENT MUST BE MADE, REMOVE REVOLVING FORM BY
SIMPLY LIFTING IT STRAIGHT UP OFF THE BASE.

PROBLEM: Revolving Form “drags” on base.

TO CORRECT:

Loosen F286 Bearing Lock Nut. Turn F287 Bearing Adjustment
Screw COUNTER-CLOCKWISE.

CHECK ADJUSTMENT: Replace revolving form on base. Rotate form. If perfectly

adjusted, form will rotate freely and snugly on felt seal
around top of base. If form is still too low...or too
high...repeat adjustment until it is correct.

PROBLEM: Revolving Form rides too high above base.

TO CORRECT:

Loosen F286 Bearing Lock Nut. Turn F287 Bearing Adjustment
Screw CLOCKWISE.

CHECK ADJUSTMENT: Replace revolving form on base. Rotate form. If perfectly

adjusted, form will rotate freely and snugly on felt seal
around top of base. If form is still too high...or too
low...repeat adjustment until it is correct.