Chaney Instrument model 00886 digital thermometer User Manual
00886
Digital Thermometer with Probe
LAKE GENEVA, WI 53147
www.chaneyinstrument.com
Any Chaney instrument which proves
to be defective in material or
workmanship within one year of
original purchase will be repaired or
replaced. This warranty does not
cover damage in shipment or failure
caused by tampering, carelessness
or abuse.
LIMITED WARRANTY
Wide Temperature Range -58˚F to 158˚F Fahrenheit and Celsius Selectable
Folding Stand or Wall Mount Measures indoor and outdoor termperature
MIN/MAX temperature display with memory and light
10' weather-proof sensor wire
INSTALLATION INSTRUCTIONS:
THE UNIT:
Choose a suitable space away from direct sunlight, heating and air conditioning vents.
Option 1: Use enclosed Velcro for wall mounting.
Option 2: Use flip-down stand to display on flat surface.
THE UNIT:
Choose a suitable space away from direct sunlight, heating and air conditioning vents.
Option 1: Use enclosed Velcro for wall mounting.
Option 2: Use flip-down stand to display on flat surface.
THE OUTSIDE SENSOR:
Make sure the remote sensor wire will reach outside before mounting the unit. Remove the
protective paper from sensor, press firmly in position free from direct sunlight and rain.
OPERATING INSTRUCTIONS:
Slide the battery door open. Insert the battery as indicated.
Make sure the remote sensor wire will reach outside before mounting the unit. Remove the
protective paper from sensor, press firmly in position free from direct sunlight and rain.
OPERATING INSTRUCTIONS:
Slide the battery door open. Insert the battery as indicated.
INDOOR TEMPERATURE READOUT:
1. Slide the switch on the side of the thermometer to the “IN” position. The display will show the
1. Slide the switch on the side of the thermometer to the “IN” position. The display will show the
current indoor temperature as detected by the built-in sensor.
2. Press the MIN/MAX button once to display the maximum indoor temperature readout. Press the
MIN/MAX button twice to display the minimum indoor temperature readout. Press the MIN/MAX
button three times to return to the current indoor temperature.
button three times to return to the current indoor temperature.
3. Press clear after pushing the MIN/MAX button once to erase the maximum indoor temperature
stored in memory. Press clear after pushing the MIN/MAX button twice to erase the minimum
indoor temperature stored in memory.
indoor temperature stored in memory.
4. Slide conversion switch on back side of unit to
°F for Fahrenheit temp. readout or °C for Celsius
temperature readout.
5. Pressing the LIGHT button will provide illumination.
OUTDOOR TEMPERATURE READOUT:
1. Slide switch on the side of the thermometer to the “OUT” position. The display will show the
OUTDOOR TEMPERATURE READOUT:
1. Slide switch on the side of the thermometer to the “OUT” position. The display will show the
current outdoor temperature as detected by the outside sensor.
2. Follow steps 2 & 3 from above for MIN/MAX outdoor temperature readouts.