Intermatic 158ha11645-art User Manual
Adding Modules to ALL ON/ALL OFF Feature
The HA07 Master Controller includes an ALL ON/ALL OFF
feature that allows all lighting modules in the network to be
turned ON or OFF at the same time. As modules are added
to the network, only the following modules are automatically
added to the ALL ON/ALL OFF feature:
- HA03 Lamp Module
- HA05 Screw-In Lamp Module
- HA06 In-Wall Switch/Dimmer
- Other Z-WaveTM compatible lamp modules and dimmers
If you would like to add additional modules to the ALL
ON/ALL OFF feature that are not listed above, please do the
following:
feature that allows all lighting modules in the network to be
turned ON or OFF at the same time. As modules are added
to the network, only the following modules are automatically
added to the ALL ON/ALL OFF feature:
- HA03 Lamp Module
- HA05 Screw-In Lamp Module
- HA06 In-Wall Switch/Dimmer
- Other Z-WaveTM compatible lamp modules and dimmers
If you would like to add additional modules to the ALL
ON/ALL OFF feature that are not listed above, please do the
following:
INCLUDE Modules to the ALL ON/ALL OFF feature:
1. (See Fig 13a) Press and hold ALL ON and ALL OFF
buttons at the same time (about 4 seconds) until the
display reads ALLSET. (NOTE: ALLSET will time out
after 10 seconds. If this happens, repeat step 1.)
display reads ALLSET. (NOTE: ALLSET will time out
after 10 seconds. If this happens, repeat step 1.)
2. (See Fig 13b) Press and hold INCLUDE on the
controller.
3. (See Fig 13c) Press and release the PROGRAM button
on the Home Settings module.
4. SUCCESSFUL should be indicated on the display. If
not successful, repeat steps 1-3.
Page 20 of 35